• Mandrel Dimpled Roller Wrap
    4863RW
    31.5 mil. Specially treated fabric covered with a gray embossed silicone rubber coating. Acrylic Adhesive. Highly resistant to "sticky" substances y...
  • PVC Electrical Insulating
    EL760-B
    COLORS AVAILABLE: Black,White,Green,Orange,Red,Blue & Yellow...
  • PVC Electrical Insulating Tape-Black
    EL7xx-B*
    7 mil (0.178mm) PVC Electrical Insulation Tape, Natural Rubber adhesive. For wire and cable insulation, bundling, primary splice insulation at no mor...
  • PVC Electrical Insulating Tape-Black
    EL760Aw-L
    Black , Same specs as EL766AW,L....
  • Flame retardant and cold resistant
    EL766AW-L
    7 mil (0.18mm). Plasticized PVC film with an aggressive rubber based adhesive in OSHA colors. For cable coding, quick identification of electrical p...
  • Flame retardant and cold resistant
    EL766AW-B
    7 mil (0.18mm). Plasticized PVC film...
  • ALL Weather-Flame retardant and cold resistant
    EL7566AW-L
    8.0 mil (0.20mm) Black PVC Premium Grade Electrical Insulation Tape with rubber based adhesive. Dielectric breakdown: 6KV. Individually cello wrappe...
  • ALL Weather-Flame retardant and cold resistant
    EL7566AW-B
    8.0 mil (0.20mm) Black PVC Premium...
  • SPVC PIPE WRAP/Surface Protection Film
    PWT-10C
    10 mil (0.25mm). Black matte surface. Rubber Adhesive.Flame Retardant Adhesion/steel: 12 oz/in. Tensile: 20 lb/in. Elongation: 276%. Dielectric stre...
  • WHITE SPVC Pipe Wrap
    PWT-10H
    10 mil 1.5 (38.1mm) neutral core for HVAC Industry....
  • GREEN SPVC Pipe Wrap
    PWT-10G
    10 mil 1.5 (38.1mm) neutral core.ONLY available in 2" (50mm). Packed 24 RLC/CS, same cost as white....
  • SPVC Pipe Wrap/Surface Protection Film
    PWT-20C
    20 mil(0.50mm). Black matte surface. Rubber Adhesive. Flame Retardant. Adhesion/steel: 11 oz/in. Tensile: 32 lb/in. Elongation: 360%. Temperature r...
  • Colored Vinyl Tapes (matte surface-soft PVC). 3inch neutral core/carton.
    CVT-536
    36 yd. 13 OSHA Colors : Yellow,white,black,clear,red,orange,light blue, dark blue,gray,purple,emerald green,kelly green & dark brown....
  • Colored Vinyl Tapes (matte surface-soft PVC). 3inch neutral core/carton.
    CVT-560
    60 yd. 13 OSHA Colors : Yellow,white,black,clear,red,orange,light blue, dark blue,gray,purple,emerald green,kelly green & dark brown....
  • SPVC Vinyl Die Cuts On A Roll DOTS
    CVT-D
    Pressure sensitive dots & arrows. Used for aisle marking, color coding, inventory identification, defect markings, and numerous other applications. ...
  • SPVC Vinyl Die Cuts On A Roll ARROWS
    CVT-A
    Pressure sensitive dots & arrows. Used for aisle marking, color coding, inventory identification, defect markings, and numerous other applications. ...
  • Colored Vinyl Tapes (matte surface-soft PVC). 36 yd with 3inch neutral core/carton.
    CVT-636
    36 yd. Colored Vinyl Tapes (matte surface,soft PVC). 3 neutral core/carton. 16 OSHA Colors: Yellow, white, black, clear, red, orange, dark blue, med...
  • Colored Vinyl Tapes (matte surface-soft PVC). 60 yd with 3inch neutral core/carton.
    CVT-660
    60 yd. Colored Vinyl Tapes (matte surface,soft PVC). 3 neutral core/carton. 16 OSHA Colors: Yellow, white, black, clear, red, orange, dark blue, med...
  • SPVC Vinyl Colored Tape 36yd with 3 inch
    CVT-636p
    36 yd.with 3" plastic cores. 10 OSHA COLORS: Yellow, white, clear, black, red, orange, kelly green, gray, sky blue & dark blue (other colors availa...
  • SPVC Vinyl Colored Tape 60yd with 3 inch
    CVT-660P
    60 yd.with 3" plastic cores. 10 OSHA COLORS: Yellow, white, clear, black, red, orange, kelly green, gray, sky blue & dark blue (other colors availa...
  • Conformable Soft PVC Vinyl. Synthetic Rubber 18 yd
    SST-618C
    6 mil (0.15mm). Conformable Soft PVC Vinyl. Synthetic Rubber Adhesive, self,extinguishing. Adhesion: 13.7 oz/in. Tensile strength: 15 lbs/in. Elonga...
  • Conformable Soft PVC Vinyl. Synthetic Rubber 36 yd
    SST-636C
    6 mil (0.15mm). Conformable Soft PVC Vinyl. Synthetic Rubber Adhesive, self,extinguishing. Adhesion: 13.7 oz/in. Tensile strength: 15 lbs/in. Elonga...
  • Conformable Soft PVC Vinyl. 18 yd
    SST-718
    7 mil (0.175mm). Synthetic Rubber Adhesive, self,extinguishing. Adhesion: 22 oz/in. Tensile strength: 18 lbs/in. Elongation: 150% at break. Tempera...
  • Conformable Soft PVC Vinyl. 36 yd
    SST-736
    7 mil (0.175mm). Synthetic Rubber Adhesive, self,extinguishing. Adhesion: 22 oz/in. Tensile strength: 18 lbs/in. Elongation: 150% at break. Tempera...
  • SPVC Masking tape for Electroplating
    EPT-38
    6.8 mil (.017mm) Yellow Soft PVC Film. Rubber resin adhesive. Extremely conformable, durable and highly resistant to oil, acid, alkalines, corrosive...
  • Laminated SPVC 18 yd
    SST-718L
    7.5 mil (0.19mm). Laminated SPVC. 6.2 mil film. Rubber Based Adhesive. Shiny surface. Adhesion/steel: 17.6 oz/in. Tensile strength: 18 lbs/in. Elong...
  • Laminated SPVC 36 yd
    SST-736L
    7.5 mil (0.19mm). Laminated SPVC. 6.2 mil film. Rubber Based Adhesive. Shiny surface. Adhesion/steel: 17.6 oz/in. Tensile strength: 18 lbs/in. Elong...
  • Laminated PVC 18 yd
    SST-918L
    9 mil (0.22mm) 6 mil film. 2 mil over,lamination. Rubber Based Adhesive. Shiny surface. Adhesion/steel: 22 oz/in. Tensile strength: 33 lbs/in. Elo...
  • Laminated PVC 36 yd
    SST-936L
    9 mil (0.22mm) 6 mil film. 2 mil over,lamination. Rubber Based Adhesive. Shiny surface. Adhesion/steel: 22 oz/in. Tensile strength: 33 lbs/in. Elo...
  • Aisle/lane marking tape dispencer
    2LM
    For lane marking tape up to 4 wide. 3 core. Individually cartoned. NOT RETURNABLE Refer to pages 8,11 for vinyl aisle marking tapes. Also can use ...
  • Non-adhesive plasticized-yellow
    DVT-76Y
    Easy unwinding characteristics , tape clings firmly to it?s own backing for tight wrap. High elongation and good strength to permit trouble,free bin...
  • Unsintered Virgin Polytetrafluorethylene (PTFE) 3
    PTFE-3
    100% Virgin PTFE. White film in labeled plastic spool/ box. Lubricates joints, making them easy to assemble for a leak proof seal. Mil spec T,27730A...
  • Economical Acrylic Adhesive
    LDPE-5AE
    effective alternative to LDPE,5A. Its adhesive system provides a good adhesion for surface protection applications. The tough polyethylene backing o...
  • Low density polyethylene film coated - Rubber Adhesive
    LDPE-7R
    4.5 mil Low density polyethylene film coated with a synthetic rubber adhesive. Its tough polyethylene backing offers good abrasion and tear resistan...
  • Low density polyethylene film tape coated on one side with a synthetic rubber adhesive.
    LDPE-7R/UV
    4.5 mil Low density polyethylene film tape coated on one side with a synthetic rubber adhesive. Backing has been stabilized with additives to resist...
  • inchSure-Stepinch Black
    NST-20
    32 mil. 60 Grit silicon carbide. High traction, anti,slip, waterproof, coated with an aggressive pressure,sensitive acrylic adhesive. For use indoor...
  • inchSure-Stepinch BLACK/YELLOW
    NST-20B/Y
    32 mil. 60 Grit Silicone Carbide on black stripe, aluminum oxide on yellow stripe. Diagonal Safety Striped....
  • inchSure-Stepinch Optional Colors
    NST-C
    32 mil. 60 Grit Aluminum Oxide. 8 Colors Available : Clear,gray,yellow,white,red,orange,dark blue and dark green....
  • inchSure-Stepinch FLUORESCENT COLORS
    NST-20F
    32 mil. 60 Grit Aluminum Oxide. 3 Colors Available: Red,orange,and yellow. Full case quantities only....
  • Walk safely... prevent slipping
    NST-1,2 or 4-B
    Walk safely... prevent slipping, when walking in hazard places. Ideal for step, ladder, swimming pool, skate boards, etc. Various sizes and colors t...
  • Walk safely... high traction
    NST-624B
    Walk safely...high traction (gritty surface) tape ideal for use on steps, ladders, skate boards, etc. to help prevent slipping....
  • General Purpose
    GPM-63
    5.0 mil (0.127mm) A . A utility grade masking tape, cream color crepe paper with a solvent based natural rubber adhesive system. Tape conforms to a ...
  • High Temp Automotive Masking
    HTM-816
    6.4mil (0.162mm) Premium, high temperature cream color masking tape with a solvent based cured natural rubber based adhesive system designed to work...
  • Colored Masking Tape
    CPM-60
    5.2 mil. Saturated crepe paper backing, synthetic rubber resin adhesive. The adhesive is formulated for easy release and good adhesion to a variety ...
  • Brown Kraft Flatback Tape
    KFT-530
    7.0 mil Brown color kraft flatback paper coated with a natural synthetic rubber based adhesive system. An economical, pressure sensitive, moisture r...
  • Tan Kraft Flatback Tape
    KFT-PM2
    6.0 mil Tan color kraft flatback paper, coated with a natural rubber resin adhesive system. A quick, sure sealing, economical, pressure,sensitive fl...
  • Printable Colored Flatback Tape
    CFB-60
    5.8 mil (0.147mm) Bright colorful flatback papers coated with a high performance natural rubber resin adhesive. The flat surface of the tape (vs...
  • Colored Flatback Tape
    CFB-75
    7.5 mil Moisture resistant, medium tensile strength, pressure,sensitive flatback tape, used for packaging, bookbinding, marking bins and shelves, de...
  • Natural color transfer premask
    PRE-MASK
    5.3 mil natural color transfer premask. Translucent saturated paper. Rubber resin based adhesive. Fully compatible for plotter cuts and thermal die ...
  • Blue UV Resistant Masking Tape
    PGM-UV14
    5.2 mil Painter?s Grade Masking tape with a specially formulated...
  • Surface printed
    TEV-ST
    3.9mil Tamper Evident Polyester tape with Acrylic adhesive. Carton sealing tapes that leave a security legend deposited on the box or container upon ...
  • Surface printed (Red or Tan)
    TEV-OVR or OVT...
    Solid, non,surface printed tape with hidden OPENED VOID message upon removal. Has an instant initial grab & can be removed immediately to show the...
  • ACRYLIC ADHESIVE
    PP20F-W
    2.0 Mil (0.055mm).30u film. Water based acrylic adhesive. One (1) color printing: red on WHITE film. 3 neutral core/carton....
  • ACRYLIC ADHESIVE
    PP20W-C or PP20W-W
    2.0 Mil (0.055mm). 30u film.Water based acrylic adhesive. One(1) color printing: red on CLEAR or WHITE film. 3 neutral core/carton....
  • ACRYLIC ADHESIVE
    PP20S-W or PP20S-C
    2.0 Mil (0.055mm). 30u film.Water based acrylic adhesive. . Two (2) color printing: red and black on WHITE OR CLEAR film. 3 neutral core/carton....
  • ACRYLIC ADHESIVE
    PP22S-W
    2.2 Mil (0.055mm). 30u film. Solvent based acrylic adhesive.Two (2) color printing: red and black on WHITE film. 3 neutral core/carton....
  • ACRYLIC ADHESIVE
    PP20S-T or PP20S-C
    2.0 Mil (0.055mm). 30u film. Water based acrylic adhesive.Two (2) color printing: red and black on TAN or CLEAR film. 3 neutral core/carton....
  • ACRYLIC ADHESIVE
    PP22S-T
    2.2 Mil (0.055mm). 30? film. Solvent based acrylic adhesive. Two (2) color printing: red and black on TAN film. 3� neutral core/carton....
  • Clear and Brown
    OPP-16AW
    1.6 mil (0.041mm). 23 micron film. 17 micron Wather based Acrylic Adhesive. Tensile: 11 lbs/in. Adhesion to steel: 18 oz/in. Elongation: 180%. 3 Ta...
  • Clear and Brown
    OPP-18AW
    1.8 mil (0.046mm). 25 micron film, 21 micron Water Based Acrylic. Tensile: 17 lbs/in. Adhesion to steel: 21 oz/in. Elongation: 180%. Temperature re...
  • Clear and Brown
    OPP-20AW
    2.0 mil (0.050mm). 28 micron film. 22 micron Wather based acrylic adhesive. Tensile: 18 lbs/in. Adhesion to steel: 22 oz/in. Elongation: 180%. Temp...
  • Clear and Brown
    OPP-26AW
    2.6 mil (0.066mm). 38 micron film. 27 micron Wather based acrylic adhesive Tensile: 27 lbs/in. Adhesion to steel: 22 oz/in. Elongation: 180%. Tempe...
  • Clear, Brown and White
    OPP-32AW
    3.2 mil (0.081mm). 48 micron film. 32 micron Wather based acrylic Adhesive. Premium grade, high strength, biaxially oriented polypropylene film. Lo...
  • Clear and Tan
    OPP-22A
    2.2 mil (0.055mm). 28 micron film. A biaxially oriented polypropylene tape, coated with a Solvent based acrylic adhesive. Adhesion: 23 oz/in. Tensil...
  • Clear and Tan
    OPP-26A
    2.7 mil (0.068mm). 40 micron film. A biaxially oriented polypropylene tape, coated with a Solvent Based Acrylic Adhesive. Adhesion: 27 oz/in. Tensil...
  • Clear and Tan
    OPP-34A
    3.6 mil (0.09mm). 60 micron film. A biaxially oriented polypropylene tape, coated with a PREMIUM GRADE Solvent Based Acrylic Adhesive. Adhesion: 33...
  • Crystal Clear
    OPP-22CC
    2.2 mil (0.055mm). 28 micron film. A biaxially oriented polypropylene tape, coated with a solvent based acrylic adhesive. Adhesion: 27 oz/in. Tensil...
  • Crystal Clear
    OPP-26CC
    2.7 mil (0.068mm). 40 micron film. A biaxially oriented polypropylene tape, coated with a solvent based acrylic adhesive. Adhesion: 30 oz/in. Tensil...
  • Crystal Clear
    OPP-34CC
    3.6 mil (0.09mm). 60 micron film. A biaxially oriented polypropylene tape, coated with a solvent based acrylic adhesive .Adhesion: 30 oz/in. Tensile...
  • COLORS
    OPP-20C
    2.0 mil (0.051mm). 28 micron film. Water Based Acrylic Adhesive. Adhesion: 22 oz/in. Tensile: 18 lbs/in. Elongation at break: <180%. Application tem...
  • COLORS
    OPP-22C
    2.2 mil (0.055mm). 28 micron film. Solvent Based Acrylic Adhesive. Adhesion: 27 oz/in. Tensile: 20 lbs/in. Elongation at break: 140%. Temp. resista...
  • COLORS
    OPP-26CAW
    2.7 mil (0.068mm). 38 micron film. 27 micron Water Based Acrylic Adhesive. Adhesion: 22 oz/in. Tensile: 20 lbs/in. Elongation at break: 130%. Appli...
  • COLORS
    OPP-26C
    2.7 mil (0.068mm). 40 micron film. Solvent Base Acrylic Adhesive High quality adhesive and strong film makes this tape an excellent choice for dema...
  • Economy Grade
    OPP-16HM
    1.6mil (0.041mm) 25 micron Cast film with Hot Melt/Synthetic Rubber Resin Adhesive. Adhesion to steel: 30 oz/in. Tensile: 17.6 lbs/in (machine direc...
  • Industrial Grade
    OPP-18HM
    1.8mil (0.046mm) 27 micron Cast film with Hot Melt/Synthetic Rubber Adhesive. Adhesion to steel: 32 oz/in. Tensile: 27 lbs/in Elongation 70%. 3 neut...
  • Clear
    OPP-18NR
    1.80 mil (0.045mm). 25 micron film. Solvent Based Natural Rubber Adhesive. Tensile: 21 lbs/in. Adhesion to steel: 22 oz/in. Elongation: 170%. Applic...
  • Clear
    OPP-20NR
    2.0 mil (0.048mm). 28 micron film. Solvent Based Natural Rubber Adhesive. Tensile: 23 lbs/in. Adhesion to steel: 22 oz/in. Elongation: 170%. Applica...
  • Clear
    OPP-26NR
    2.5 mil (0.062mm). 40 micron film. Solvent Based Natural Rubber Adhesive. Tensile: 30 lbs/in. Adhesion to steel: 20 oz/in. Elongation: 190%. Applica...
  • Clear
    PES-32G
    3.0 mil total thickness. 2.0 mil (0.050mm) heavy,duty Polyester film. Highest quality/performance packaging, sealing, and splicing tape. Extremely a...
  • Packaging: White/Tan/Clear
    UPVC-22
    2.2 mil (32 micron film). Solvent based natural rubber adhesive. Adhesion: 15 oz/in. Tensile: 42 lbs/in. Elongation: 75%. Temp. Resistance: 158F. Qu...
  • Medium Grade
    UPVC-24
    2.4 mil (35 micron film). Solvent based natural rubber adhesive. Adhesion: 15 oz/in. Tensile: 42 lbs/in. Elongation: 75%. Temp. Resistance: 158F. Fo...
  • Colors
    UPVC-24C
    2.4 mil (35 micron film). Solvent based natural rubber adhesive. Adhesion: 15 oz/in. Tensile: 42 lbs/in. Elongation: 75%. Temp. Resistance: 158F. Us...
  • Fluorescent Orange
    UPVC-25F
    2.5 mil (37 micron film). Solvent based natural rubber adhesive. Adhesion: 15 oz/in. Tensile: 42 lbs/in. Elongation: 90%. Temp. Resistance: 158F. Fo...
  • Bag Sealing
    UPVC-22BS
    2.2 mil (32 micron film). UPVC coated with a Solvent Based Natural Rubber Adhesive. Adhesion: 15 oz/in. Tensile: 42 lbs/in. Elongation: 75%. Tempera...
  • Bag Sealing
    UPVC-24BS
    2.4 mil (35 micron film). UPVC coated with a Solvent Based Natural Rubber Adhesive. Adhesion: 15 oz/in. Tensile: 42 lbs/in. Elongation: 75%. Tempera...
  • Clear
    LP-16AW
    Label protection/lamination. Polypropylene. Total thickness: 1.6 mil (0.041mm), 23 micron film.Water Based Acrylic Adhesive. High clarity. Adhesion:...
  • Clear 2.0 mil
    OPP-20AW
    Water Based Acrylic Adhesive....
  • Crystal Clear 2.0 mil
    LP-20CC
    Prescription, label protection, & lamination. Polypropylene. Total Thickness: 2 mil (0.05mm). 1.1 mil (28 micron) film. Solvent Based Acrylic Adhesiv...
  • Static Free on 1 inch plastic core
    CELLO-1
    1.8 mil (0.46mm) total. Pure cellulose, transparent, biodegradable, hand,tearable tape with a Solvent Based Natural Rubber Adhesive. STATIC,FREE for...
  • Static Free on 3 inch neutral paper core
    CELLO
    Temperature resistance: 32F to 150F. Adhesion: 30 oz/in. Tensile: 26 lbs/in. Elongation: 25%....
  • Clear Stationery Tape
    SPP-20HTW-1
    Stationery tape, polypropylene, 2.0 mil (0.05mm), hand,tearable. Water Based Acrylic adhesive. Adhesion: 22 oz/in. Tensile: 18 lbs/in. Sub,packed. 1...
  • Clear Stationery Tape
    SPP-20HTW
    Stationery tape, polypropylene, 2.0 mil (0.05mm), hand,tearable (score slit) . Water Based Acrylic Adhesive. Adhesion: 22 oz/in. Tensile: 18 lbs/in....
  • Clear Stationery Tape
    SPP-20RW-B
    Stationery tape, polypropylene, 2.0 mil (0.05mm). Razor slit(Not hand tearable). Best for use in dispensers. Water Based Acrylic Adhesive. Adhesion...
  • Stationery Tape on Half Dispenser
    20HT-D
    Retail put,up. 1/2� & 3/4� wide x 800� long OPP stationery tape on half,dispenser. Carded (generic imprint). Water Based Acrylic Adhesive. 6 i...
  • Invisible mending Tape
    INV-20M-1
    Write,on invisible mending tape, 2.0 mil., 25 micron film, 18 micron adhesive. Translucent ,frosty,white. Specially treated matte finish polypropyle...
  • Invisible mending Tape
    INV-20M
    Prescription/label protection & overlamination, 2.0 mil, (0.05mm) total. Specially treated matte finish polypropylene film with Solvent Based Acryli...
  • Tensilized Polypropylene
    PP-500
    2.8 mil (0.072mm). 97# Tensile. Synthetic Rubber/Resin Adhesive. Adhesion to steel: 55 oz/in. Elongation: 35%. Good initial tack and high shear resi...
  • Heavy-duty tensilized polypropylene
    PP-800
    3.8 mil (0.097mm). 149# Tensile. Natural Rubber Based Adhesive. Adhesion to steel: 55 oz/in. Elongation: 35%. Good initial tack and high shear resis...
  • Appliance tape.Non-staining and residue free.
    PP-4298
    4.5 mil (0.114mm).149# Tensile. Natural Rubber Based Adhesive. Adhesion to steel: 64 oz/in. Elongation: 30%. Specially designed to be stain and adhe...
  • High Tensile Polypropylene Tapes
    PP-5101
    5.0 mil (0.127mm). 228# Tensile. Metal gray Synthetic Rubber Based Adhesive. Adhesion to steel: 64 oz/in. Elongation: 20% at break. Has an excellent...
  • Uni-directional filament
    FIL-795
    3.9 mil 92# Tensile. Fiberglass reinforced 1.0 mil polypropylene rubber based pressure sensitive strapping tape. Commodity grade. Adhesion: 69 oz/in...
  • Uni-directional filament
    FIL-825
    4.4 mil 130# Tensile. Fiberglass reinforced polypropylene. Hot melt synthetic rubber adhesive. Adhesion: 91 oz/in. Elongation: 6%. General purpose f...
  • Uni-directional filament
    FIL-890
    5.5 mil 200# Tensile. Fiberglass reinforced polypropylene. Clear synthetic rubber based adhesive. Adhesion: 91 oz/in. Elongation: 7%. Industrial gra...
  • Uni-directional filament
    FIL-930P
    8.5 mil 330# Tensile.Very high strength polyester backed unidirectional fiberglass filament reinforced tape coated with an aggressive and high shear...
  • Bi-directional filament
    FIL-835B/D
    4.8 mil.155# Tensile in both directions. Fiberglass reinforced polypropylene. Clear synthetic rubber adhesive. Adhesion: 90 oz/in. Elongation: 6%. H...
  • Hand Wrap and Stretch Film Dispensers
    SFW-20EH
    47 Gauge Pre,Stretched Cast Wrap. 20 wide, with an extended handle....
  • Matte Black Aluminium-Acrylic Adhesive
    AF-22A-B
    2.2 mil Matte Black, non,reflective Aluminum Foil coated with an aggressive Acrylic pressure sensitive adhesive; removable white paper release liner...
  • Rubber Adhesive
    AF-12R
    Economical aluminum foil tape for moderate demand applications. 1.2 mil dead soft aluminum foil, coated with an aggressive hot melt synthetic rubber...
  • Acrylic Adhesive
    AF-12A
    Economical aluminum foil tape for moderate demand applications. 1.2 mil dead soft aluminum foil, coated with a solvent based acrylic adhesive; remov...
  • Rubber Adhesive
    AF-16R
    1.6 mil dead soft high,grade Aluminum Foil coated with an aggressive synthetic rubber adhesive; removable paper release liner; total thickness 3.2 m...
  • Acrylic Adhesive
    AF-16A
    1.6 mil dead soft high,grade Aluminum Foil coated with an aggressive solvent based acrylic adhesive; removable paper release liner; total thickness ...
  • Rubber Adhesive
    AF-20R
    2 mil dead soft premium grade Aluminum Foil coated with an extremely aggressive synthetic rubber adhesive that provides a tight positive grab when s...
  • Acrylic Adhesive
    AF-20A
    2 mil dead soft high tensile Aluminum Foil coated with an aggressive solvent based acrylic adhesive; removable paper liner. Malleable foil conforms ...
  • High performance,Acrylic Adhesive
    AF-30A
    3 mil high strength dead soft Aluminum Foil coated with an aggressive solvent based acrylic adhesive easy removable paper liner. Malleable foil conf...
  • High performance,Acrylic Adhesive
    AF-50A
    5 mil high strength Aluminum Foil backing, combined with a high performance solvent acrylic adhesive, protected by an easyrelease silicone release p...
  • Self Wound
    AF-20SW
    2.0 mil self wound dead soft malleable Aluminum Foil coated with acrylic adhesive. Malleable foil conforms well to irregular surfaces. Excellent har...
  • Self Wound
    AF-30SW
    3 mil high strength self wound dead soft Aluminum Foil coated with an aggressive acrylic adhesive system to create a superior bond. Designed to stic...
  • With Acrylic Adhesive
    AF-FSK-A
    Dead soft aluminum foil / 3,way fiberglass scrim / paper carrier coated with aggressive adhesive carried on a 3.2 mil removable paper release liner....
  • With Rubber adhesive
    AF-FSK-R
    Dead soft aluminum foil / 3,way fiberglass scrim / paper carrier coated with aggressive adhesive carried on a 3.2 mil removable paper release liner....
  • Copper Foil Tapes with acrylic adhesive
    CFL-5A
    Special electrograde, zero temper, high tensile copper foil tape. Provides excellent solderability. Malleable copper foil conforms well to irregular...
  • Copper Foil Tapes with conductive acrylic adhesive
    CFL-5CA
    Special electrograde, zero temper, high tensile copper foil tape. Provides excellent solderability. Malleable copper foil conforms well to irregular...
  • With acrylic adhesive - with liner.
    LF-5A
    100% pure lead foil which is highly malleable and can be shaped to the most intricate patterns. Coated with a specially designed aggressive removabl...
  • With rubber adhesive - with liner.
    LF-5R
    100% pure lead foil tape coated with a rubber based adhesive system which exhibits excellent adhesion to a wide variety of surfaces, especially to m...
  • Clear - Acrylic Adhesive
    MYP-25CA
    2.4 mil total , 1 mil Polyester film with 1.4 mils of pre,cured solvent resistant electrical grade acrylic adhesive. Excellent resistance to solvents...
  • Clear- Silicone Adhesive
    MYP-25CS
    2.5 mil total , 1 mil Polyester film with 1.5 mils of pre,cured solvent resistant electrical grade silicone adhesive. Designed to be fully stable el...
  • Blue - Silicone Adhesive
    MYP-3US
    3 mil total , 1 mil Polyester film with 2 mils of a silicone adhesive system. Resists fumes and chemicals, and leaves minimum residue on removal. Al...
  • Red - Silicone Adhesive
    MYP-3RS
    3 mil total , 1 mil polyester film coated with 2 mils of silicone adhesive system. Resists fumes and chemicals, and leaves minimum residue on remova...
  • Emerald green - Silicone Adhesive
    MYP-36GS
    3.6 mil total , Translucent 2 mil polyester film with 1.6 mils of a nonresiduing pure silicone adhesive system. One of the cleanest and strongest sp...
  • Dark blue - Silicone Adhesive
    MYP-36US
    3.6 mil total , Translucent 2 mil polyester film with 1.6 mils of a nonresiduing pure silicone adhesive system. One of the cleanest and strongest sp...
  • Brown / Rust - Silicone Adhesive
    MYP-36OS
    3.6 mil total , Translucent 2 mil polyester film with 1.6 mils of a nonresiduing pure silicone adhesive system. One of the cleanest and strongest sp...
  • Pink - Silicone Adhesive
    MYP-571PS
    2.5 mil total ,Translucent 1mil polyester film tape. 1 mil polyester film with 1.5 mils of silicone adhesive. Bonds quickly to silicone coated surfa...
  • Glass Cloth-SIlicone Adhesive
    GC-SH7
    7.6 mil , Electrical Grade 5.6 mil Glass Cloth with Silicone Adhesive. Conformable; chemical and solvent resistant; printable. Used in strategic mas...
  • Aluminum Foil/Glass Cloth/Silicone Adhesive
    GC-SA7
    7.0 mil , Fiberglass Cloth with Aluminum Foil laminate. Provides high strength and reflectivity with excellent flexibility. Cloth is coated with hig...
  • Self-Wound (without liner)
    TFES-2HD*
    Pure skived PTFE with a high temp .silicone adhesive. Used in electrical applications such as harness/coil wraps & separators, transformers and sl...
  • Self-Wound (without liner)
    TFES-5
    Pure skived PTFE with a high temp .silicone adhesive. Used in electrical applications such as harness/coil wraps & separators, transformers and sl...
  • Self-Wound (without liner)
    TFES-10
    Pure skived PTFE with a high temp .silicone adhesive. Used in electrical applications such as harness/coil wraps & separators, transformers and sl...
  • Wavw Solder / Hot Air Leveling Tape
    KPT-(Mil)
    1 and 2 mil Electrical Grade KaptonTM Alternative POLYIMIDE film coated with a high performance silicone adhesive. Thin and conformable, with outsta...
  • Specify with (WL) or without (SW) liner
    TFE- mil thickness(-3,-5,-6,or -10)
    Impregnated fiberglass cloth, consisting of warp and fill yarns, and coated with a high temperature silicone adhesive. Excellent electrical, mechanica...
  • Ultra High Molecular Weight (UHMW) Polyethylene Tape
    UHMW-(Mil)
    Ultra High Molecular Weight (UHMW) Polyethylene Tape. 3 mil, 5 mil, 10 mil, 15 mil and 20 mil with an aggressive Acrylic adhesive. Its high chemical ...
  • Metalized Polyester Film with brilliant
    MMYP-1
    1.0 mil Metalized Polyester Film with brilliant, vibrant mirror,like finish; coated with an aggressive long lasting acrylic adhesive system. Tapes h...
  • Crepe Paper
    DC-2306
    6.0 mil (9.2 mil with liner). 3.5 mil high quality saturated crepe paper coated on both sides with a medium tack, high shear, synthetic copolyme rru...
  • Crepe Paper
    DC-2308
    7.0 mil (10.2 mil with liner). 5 mil high quality saturated crepe paper, coated on both sides with a high tack, high shear hot melt rubber adhesive ...
  • Paper
    DC-4309LW
    3.5 mil (0.09mm) exclusive of liner. 1.5 mil (0.35mm) white paper coated on both sides with a high tack modified solvent free water based acrylic ad...
  • Paper
    DC-4317VS
    6.7 mil (0.17mm) exclusive of liner. 4 mil white paper coated on both sides with an aggressive modified solvent free water based acrylic adhesive ;...
  • Flatback paper
    DC-2307
    7.0 mil (12 mil with liner). Flatback paper coated on both sides with a high shear/aggressive solvent based natural rubber resin adhesive system tha...
  • Tissue-black
    DC-4210VS-B
    3.9 mil (0.10mm) exclusive of liner. 0.5 mil black, non,woven tissue coated on both sides with a modified, solvent,free acrylic adhesive, wound on g...
  • Tissue
    DC-4210RS
    3.9 mil (0.10mm) exclusive of liner. 0.5 mil white, non,woven tissue coated on both sides with a modified, solvent free water based acrylic adhesive,...
  • Tissue
    DC-4215WO
    5.9 mil (0.15mm) exclusive of liner. 0.5 mil non,woven tissue coated on both sides with an aggressive, modified solvent free water based acrylic adh...
  • Tissue
    DC-1210
    4.0 mil. exclusive of liner. 1.8 mil tissue substrate, coated on both sides with an aggressive synthetic hot melt rubber adhesive 2.6 mil. Gold sili...
  • Tissue
    DC-3206SA
    2.4 mil (0.06mm) exclusive of liner. 1.1 mil white, tissue coated on both sides with a solvent,based acrylic adhesive, wound on white Kraft paper li...
  • Polypropylene -(Clear)
    DC-3522
    8.6 mil (0.218mm) exclusive of liner. 2.2 mil high performance transparent PP film coated on both sides with age resistant solvent based acrylic adhe...
  • Linerless Repositional (Clear)
    DC-665
    3.5 mil (0.089mm). 3M Removable Repositionable Tape 665 is a clear, linerless tape with repositionable adhesive on a clear UPVC film carrier. Slight...
  • Heavy-duty Scrim Tape
    DC-4623MF
    A 9.1 mils thick polyester (PES/PVA) reinforced transfer tape with an aggressive, modified solvent free water based acrylic adhesive. Gold 90 gr. si...
  • White foamed acrylic tape
    FA-UHB16W
    White foamed acrylic tape 15.7mils (0.40mm) exclusive of liner. White foamed acrylic with RED PE liner. Perfect for bonding components in the electr...
  • Gray foamed acrylic tape
    FA-UHB16E
    Gray foamed acrylic tape 15.7mils (0.40mm) exclusive of liner. Gray foamed acrylic with a special composition giving excellent all around bonding pr...
  • PERMANENT/REMOVABLE (HI/LO)
    7211-7212
    A 2.8 mil (5.3 mil total) differential synthetic rubber with a polyester carrier and a 42# coated Kraft paper with finger,lift edge. Clear, lightwei...
  • LIGHT DUTY REMOVABLE
    7301-7303
    A 1.0 mil (3.5 mil total) removable transfer tape with synthetic rubber based adhesive and a 42# coated Kraft paper with finger,lift edge. Light,wei...
  • Transfer
    TR-7502
    2.0 mil. (0.051mm) Glass stabilized solvent based modified acrylic adhesive wound on a Gold siliconized paper release liner. Glass stabilization al...
  • Transfer
    TR-7502X
    2.1 mil. (0.053mm) Glass stabilized solvent based modified acrylic adhesive wound on a Gold siliconized paper release liner (2.8 mil thick). Glass...
  • Transfer
    TR-7901
    1.9 mil (0.049mm). Glass stabilized Solvent Based Modified Acrylic Adhesive wound on a brown siliconized paper release liner. Glass stabilization al...
  • Transfer
    929TR
    Dispenser for transfer tapes on 3 core Maximum roll O.D. is 5,1/4 (cannot be used with 60yd TR,7505 or 110yd TR,7502, 7502X or 7901). Hand held disp...
  • Transfer
    TR-7505
    4.8 mil (0.122mm) glass stabilized Solvent Based Modified Acrylic Adhesive wound on a brown siliconized paper release liner. Glass stabilization all...
  • Reverse wound transfer
    ATG-7501
    Transfer tape. 1.6 mil (0.040mm). Glass stabilized Solvent Based Acrylic Adhesive. Gold paper liner. Peel adhesion: 18 oz/in. Temperature range: ,22...
  • Reverse wound transfer
    ATG-7502
    Transfer tape. 2.0 mil (0.051mm). Glass stabilized Solvent Based Acrylic Adhesive. Gold paper liner. Peel adhesion: 27 oz/in. Temperature range: ,22...
  • Reverse wound transfer
    ATG-7502X
    Transfer tape. 2.1 mil (0.053mm). Glass stabilized Solvent Based Acrylic Adhesive. Gold paper liner. Peel adhesion: 32 oz/in. (More aggressive adhes...
  • Reverse wound transfer
    ATG-7505
    Transfer tape. 4.8 mil (0.122mm). Fiberglass stabilized Modified Acrylic Adhesive. Brown paper liner. Peel adhesion: 73 oz/in. Temperature range: ,4...
  • Tape dispencer for reverse wound transfer
    ATG-50
    Tape dispenser for reverse wound transfer tapes on 1 plastic cores. Dispenser has a special pin spool allowing use of complete roll without any was...
  • A versatile double coated tissue tape with extended liner
    7308 - 7312 / 0321-0322/0317
    A 3.2 mil (5.7 mil total) sythetic rubber tape with exceptional holding strength and an aggressive adhesive system with a 42# coated Kraft paper wit...
  • Permanent hot melt rubber transfer tape
    8502-8504 /7323
    A 1.0 mil (3.3 mil total) synthetic rubber adhesive with a 42# silicone, coated Kraft paper w/ finger,lift edge. Provides a permanent surface,to,sur...